Pipette Tip Mould

Micron Tip Diameter for Accurate Liquid Handling

 

Pipette tips need a precise inner diameter at the tip. A 0.005mm difference can change the dispensed volume. Taizhou KENI Mould Co., Ltd. built this Pipette tip mould to meet that micron‑level standard. Standard cavities are 48 or 96. Tip inner diameter tolerance is ±0.005mm. Minimum tip wall thickness is 0.25 to 0.35mm. That is extremely thin but still strong enough not to break. Cycle time is 11 to 16 seconds per shot. Gate diameter is Φ0.4 to 0.6mm. Cavity hardness is HRC 56 to 58. Finished part pass rate is ≥99.7%. This Pipette tip mould gives you high yield and consistent tip geometry for lab automation.

We inspect every Pipette tip mould with precision gauges. Tip inner diameter is measured cavity by cavity. Before we start, we learn your pipettor model and fit requirements. We have a dedicated after‑sales person. They visit you regularly. If problems come up, we solve them fast. Free samples are negotiable. Every Pipette tip mould gets 100% inspection before shipping. We offer a one‑year free warranty. After that, lifetime maintenance is available at cost. Our quality team maintains a 99.7% pass rate standard. We accept third‑party inspections. Repeat orders save 7 to 10 days.

Built with High‑End Machines and Expertise

We have over 15 years of experience. Our factory uses STUDER and MAZAK high‑end machines. We are ISO certified. We support OEM and ODM orders. You can order based on drawings or prototypes. This Pipette tip mould is used for pipette tips, micro‑tips, lab dispensing tips, and automated workstation tips. We know that precision liquid handling depends on the tip. That is why we build each mold with extreme care. Our team understands the needs of research and diagnostic labs.

Hot Tags: pipette tip mould, China pipette tip mould manufacturers, suppliers, factory