Custom Bottle Cap Molds
Custom Bottle Cap Molds for Plastic Closure Manufacturing
Custom bottle cap molds are developed around the dimensions, thread profiles, sealing features and material requirements of the finished cap. Mold design also takes into account production targets and the specifications of the intended injection molding machine. From standard screw caps to closures with specialized functional features, each project begins with the product requirements and the intended molding process.
-
Custom Multi-Cavity Closure MoldEngineering-grade multi-cavity closure molds are built for high-output, continuous injection molding of plastic caps with strict dimensional stability and minimal cycle times, perfectly aligned...read more
-
Seasoning Bottle Cap MoldPrecision-machined injection molds designed specifically for seasoning, spice, and liquid condiment closures. Built with high-grade pre-hardened tool steel and optimized thermal runner layouts,...read more
-
Body Wash Closure MoldThis custom injection mold is built for manufacturing high-volume plastic closures used in personal care packaging. Designed around strict dimensional tolerances and rapid thermal cycling, the...read more
-
Shampoo Bottle Flip-Top Cap MoldOur custom shampoo bottle flip-top cap molds are engineered for high-speed, multi-cavity injection molding operations, delivering consistent snap-fit functionality, clean parting lines, and...read more
-
Custom-Profile Bottle Cap MoldCustom-profile bottle cap molds are precision injection tooling systems designed to manufacture non-standard, brand-specific closures that standard off-the-shelf tooling cannot accommodate,...read more
-
Hinged Flip-Top Closure MoldHinged flip-top closure molds are precision tooling systems engineered to manufacture integrated bottle caps featuring flexible, fatigue-resistant living hinges in a single high-speed injection...read more
Why Choose Us
Comprehensive Design Review:
Critical dimensions, thread geometry, sealing features, and demolding requirements are vetted beforehand.
01
Optimized Mold Configuration:
Cavity layout, cooling channels, runner systems, and ejection mechanics are custom-matched.
02
Strict Manufacturing Coordination:
Tooling components are machined, fitted, and assembled against approved engineering prints.
03
Equipment Matching:
Specifications are cross-checked against your machine’s tonnage, shot capacity, and dimensions.
04
Clear Technical Milestones:
Product drawings, resin data sheets, and acceptance criteria form the baseline for production.
05
Customization & Design Parameters
|
Design Parameter |
Technical Focus / Scope |
Standard Reference Data / Example Specs |
|
Cap Dimensions |
Diameter, height, wall thickness, and critical dimensional tolerances. |
Diameter: 28mm / 38mm; Wall Thickness: 0.8mm - 1.5mm |
|
Thread Design |
Thread profile, pitch, engagement dimensions, and starting position. |
1810 / 1881 / PCO 1881 standard threads, multi-start or single-start |
|
Sealing Features |
Internal plugs, sealing rings, liner interfaces, and custom structures. |
Integrated inner sealing lip, plug seal tolerance ±0.03 mm |
|
Tamper-Evident Elements |
Band geometry, connecting bridges, and functional breakaway details. |
Bridge width: 0.8mm - 1.2mm; Fold-under or scored tear bands |
|
Plastic Material |
Resin grade, shrinkage characteristics, and specific processing requirements. |
HDPE (Shrinkage: 1.5-3%), PP (Shrinkage: 1-2.5%), LDPE |
|
Cavity Quantity |
Optimized single or multi-cavity layouts for target output. |
4, 8, 16, 24, 32, up to 72 cavities depending on output needs |
|
Surface Finish |
Polished, textured, or specialized finishes for appearance and release. |
SPI A2 Diamond Polish / VDI 21-33 texture grades |
|
Mold Construction |
Core/cavity arrangements, runner systems, cooling, and ejection setups. |
H13, S136, or 2316 stainless steel with beryllium copper inserts |
|
Machine Interface |
Customized mounting dimensions matched to your injection machine. |
Tie-bar clearance, clamping tonnage (90T - 300T), ejector pattern |
Applications of Plastic Closure Molds
Screw Caps:
Built for beverage, food, and personal care bottles, ensuring optimal thread release and tight sealing surfaces.
Tamper-Evident Caps:
Designed for breakaway bands and connecting bridges with precise structural relationships.
Sealing Caps:
Engineered with internal plugs, sealing rings, or specialized liner interfaces for leak-proof performance.
Industrial Container Caps:
Developed for heavy-duty chemical and cleaning packaging under demanding operating conditions.

Product Drawing Review: Existing drawings or physical samples are analyzed to identify critical dimensions, thread profiles, and sealing surfaces.
Moldability Assessment: Draft angles, resin shrinkage, gate locations, cooling efficiency, and ejection methods are rigorously evaluated.
Mold Layout Engineering: Cavity arrangement, runner configurations, cooling channels, and ejection mechanisms are coordinated for consistent filling.
Machine Matching: The proposed design is checked against platen dimensions, tie-bar spacing, clamping capacity, and mold opening strokes.
Design Approval: Final mold drawings and key parameters are confirmed with you before manufacturing begins.
Core & Cavity: Precision-machined components that form the internal and external surfaces, threads, and seals of the cap.
Mold Base & Support: Provides structural stability and standardized mounting interfaces for your injection molding machine.
Runner & Gate System: Efficiently directs molten resin into each cavity according to specific material characteristics.
Cooling System: Strategically placed channels remove heat to optimize cycle times and ensure dimensional stability.
Ejection & Release:
Ejector plates, sleeves, or stripper mechanisms designed for safe, damage-free cap removal.
Thread Release Mechanism:
Controlled stripping or mechanical unscrewing mechanisms designed for complex threaded closures.
Guiding & Venting:
Precision guide components for alignment and vents to eliminate trapped air during rapid injection.
Mold Materials
|
Steel Grade |
Hardness |
Key Characteristics |
Typical Application |
|
S136 / 2316 |
48 - 52 HRC |
High corrosion resistance, mirror polish capability |
Standard water and beverage caps |
|
H13 |
48 - 52 HRC |
High toughness, excellent thermal fatigue resistance |
High-volume industrial and oil caps |
|
Beryllium Copper |
High Thermal Conductivity |
Rapid heat dissipation in localized hot spots |
Core tips and gate insert areas |
Cavity Configurations
|
Cavity Count |
Recommended Press Tonnage |
Typical Cycle Time |
Primary Target Market |
|
16 Cavities |
150T - 200T |
4.5s - 6.0s |
Specialty and trial runs |
|
32 Cavities |
250T - 300T |
3.5s - 4.5s |
Medium-volume standard closures |
|
48 Cavities |
350T - 400T |
3.0s - 3.8s |
High-volume beverage packaging |
|
72 / 96 Cavities |
450T - 550T |
2.5s - 3.2s |
Mass production bottling lines |
Manufacturing Process
Technical Review:
Final confirmation of cap drawings, resin specs, cavity count, and machine details.
Mold Design:
Detailed CAD/CAM preparation for cores, cavities, cooling, and runner systems.
Material Preparation:
Sourcing and cutting certified mold steels according to engineering specifications.
Precision Machining:
Utilizing high-precision CNC and EDM equipment for exact geometry and finish.
Component Finishing:
Executing heat treatment, fine polishing, and critical component fitting.
Mold Assembly:
Systematic assembly, alignment checks, and functional movement testing.
Trial Molding:
Running initial production trials with specified resin to verify performance.
Inspection & Release:
Final quality audit, sample sign-off, and secure packaging for shipment.
Material Verification: Checking steel certifications and heat-treatment records against approved project standards.
Dimensional Inspection: Utilizing advanced measuring tools to verify critical core, cavity, and fitting interfaces.
Surface & Component Checks: Inspecting molding surfaces, thread-forming areas, and alignment features for perfection.
Assembly Inspection: Testing mold alignment, smooth opening/closing movements, and cooling circuit integrity.
Documentation: Complete recording of inspection results and material data reports for full traceability.

Frequently Asked Questions

Request a Quote
To receive an accurate technical review and competitive quotation, please provide the following details:
Cap Specifications: Product drawings, sample photos, critical dimensions, and thread details.
Resin Details: Plastic material grade and processing shrinkage requirements.
Production Targets: Required output per hour, shift, or year.
Machine Data: Injection molding machine model, clamping capacity, and platen dimensions.
Preferred Cavity Count: Your target cavity quantity or a request for our professional recommendation.
Project Scope: Specify whether you need new tooling, mold modification, or a turn-key production line solution.
As one of the most professional custom bottle cap molds manufacturers and suppliers in China, we also support customized service. Please feel free to wholesale high quality custom bottle cap molds made in China here from our factory. For pricelist, contact us now.
Send Inquiry

