Engineered for high-volume automated production lines, this multi-cavity plastic injection mold delivers strict wall thickness uniformity, leak-free screw thread integrity, and reliable dimensional stability for medical specimen collection cups.
Target Applications
Clinical Diagnostic Laboratories
Automated mass production of 40ml to 120ml sample collection cups. Direct integration with high-speed automated labeling and capping stations.
In Vitro Diagnostics Manufacturing
Consistent execution of leak-proof thread tolerances for tamper-evident closures. Integration into cleanroom injection molding cells utilizing medical-grade PP or HDPE resins.
Mold Specifications
|
Parameter |
Specification Details |
|
Available Cavities |
16, 24, 32, and 48 cavities |
|
Compatible Resins |
Medical-grade PP and HDPE |
|
Design Lifespan |
Minimum 1,000,000 to 3,000,000 cycles |
|
Hot Runner System |
Valve gate configuration with dedicated zone temperature control |
|
Cooling Architecture |
Conformal and spiral circuits in core and cavity inserts |
Design & Structural Engineering
Pre-hardened German DIN 1.2316 or Japanese HPM7 steel with vacuum heat treatment. Surface hardness maintained at 48 to 52 HRC for abrasive medical polymer processing.
Stripper plate combined with precision ejector pins for balanced release without container distortion. Hydraulic-driven collapsible core systems or rotary unscrewing mechanisms for flash-free thread profiles.
Three-plate precise locating rings and self-lubricating guide pillars maintaining parting line integrity.
Cavity Layout & Flow Balancing
Balanced Runner Design
Rheologically optimized melt channels ensuring simultaneous cavity filling and uniform volumetric shrinkage.
Modular Insert Architecture
Interchangeable individual cavity and core inserts allowing rapid replacement without disassembling the mold base.
Material & Product Compatibility
Resin Viscosity Management
Optimized shear rate distribution preventing polymer degradation during high-speed injection of low-melt-index polymers.
Wall Thickness Tolerance
Maintained within plus or minus 0.03mm across the cylindrical body to ensure secure interference fit with caps.
Sealing Surface Integrity
Precision-ground parting lines eliminating flash on the container rim to guarantee liquid-tight containment during transport.
Customization Options
|
Customization Area |
Engineering Options |
|
Container Capacity |
30ml to 150ml nominal volume with custom graduated scale engraving |
|
Hot Runner Integration |
Tailored nozzle drops compatible with established thermal control systems |
|
Neck & Thread Finish |
Specific cap engagement profiles, draft angle adjustments, and base logo embossing |
|
Press Interface |
Standardized clamping plates matched to injection press tonnage from 150T to 350T |
Quality Control & Testing
Steel Certification
Material composition and hardness test reports supplied prior to machining.
Dimensional Inspection
CMM verification of core, cavity, and electrode tolerances.
Trial Run Validation
T1, T2, and T3 sample testing evaluating cycle time stability, wall thickness distribution, and leak-proof vacuum testing.
Documentation Package
Comprehensive mold manual including steel certificates, assembly drawings, spare parts list, and process sheets.
Frequently Asked Questions
Q: What is the standard lead time from drawing approval to T1 sample delivery?
A: Lead time ranges from 45 to 60 calendar days depending on cavity count, mold complexity, and hot runner configuration.
Q: What injection molding machine tonnage is required for a 32-cavity container mold?
A: Typically requires a machine clamping force between 250T and 300T equipped with dedicated hydraulic core-pull circuits and accurate closed-loop servo control.
Q: How is thread flash prevented on the container neck?
A: Achieved through tight machining tolerances between the core pin and split ring inserts, combined with precise clamping pressure and optimized injection speed profiles.
Q: What maintenance schedule is recommended for high-cavity medical molds?
A: Routine inspection of parting lines, guide pins, and hot runner tips every 100,000 cycles, alongside ultrasonic cleaning of cooling channels annually.
Hot Tags: urine specimen container mold, China urine specimen container mold manufacturers, suppliers, factory, Disposable Blood Test Cup Mould, Disposable Medical Consumables Mould, Laboratory Plastic Tube Mould, medical device hot runner mould, Medical Disposable Products Injection Mould, Medical Liquid Suction Tip Mould

